“REPS” Pipe, Stud & Screw Extractors

Remove broken pipes, studs, and screws quickly and easily

Remove broken pipes, studs, and screws quickly and easily

With REPS Extractors on hand, you are assured that expensive machinery will not be damaged by makeshift methods of removing broken pipes and studs. REPS Extractors work by pulling, rather than reaming, and are designed for strength, durability and easy handling.

A set of REPS Extractors will save time, money and equipment in machine shops, manufacturing plants, industrial plants, rail and bus lines and countless other places where machine and equipment maintenance plays a key role in day-to-day operations. REPS are also go-to broken pipe extraction tools for plumbing, heating and HVAC professionals.

REPS Pipe and Stud Extractors do the job quickly and easily, an important factor when time is critical. A complete set of ten extractors fits every size and class of pipe from 1/8” to 2”. The same set of tools fits every stud and screw from 3/8” to 3-1/2”. These extractors will save you many times their moderate cost.

REPS extractors for broken pipes, studs and screws
REPS features:
  • Four-point grip to ensure a strong bite
  • Shallow grip to reduce expansion and jamming
  • Instant release from bite after job is completed
  • Rust-resistant black oxide finish

Remove broken pipes, studs or screws!

Find a local distributor

Specifications & Ordering Information

Individual “REPS” Extractor Sizes

Recommended sizes for pipe, stud and screw extractors.

UPC No. 054808

Extractor No.
EDP No.
For Broken Pipe
For Broken Stud or Screw
1
50001
1/8"
3/8"
2
50002
1/4"
1/2"
3
50003
3/8"
5/8" or 3/4"
4
50004
1/2"
--
10
50010
--
7/8" or 1"
5
50005
3/4"
1-1/8" or 1-1/4"
6
50006
1"
1-1/2" or 1-3/4"
7
50007
1-1/4"
2"
8
50008
1-1/2"
2-1/4" or 2-1/2"
9
50009
2"
3" or 3-1/2"

Standard REPS Extractors are for right-hand pipe and studs. They are available for left-hand thread at no extra charge. Please specify “for left-hand thread,” if required.

REPS Extractor Sets

Walton REPS Extractor Set

Have each size on hand by buying a standard set. Each set is furnished in a sturdy plastic case. Set No. 210 shown.

Set No.
EDP No.
Contents
205
50205
1 each Nos. 1, 2, 3, 4, 5
206
50206
1 each Nos. 1, 2, 3, 4, 5, 6
207
50207
1 each Nos. 1, 2, 3, 4, 10, 5, 6
210
50210
1 each of all 10 sizes

PLASTIC SET CASES (empty):

For Set Nos. 205, 206, 207 – 50505 For Set No. 210 – 50510

Table of Sizes:

Extractor No.
For Broken Pipe
For Broken Stud or Screw
Use Drill Size
1
1/8"
3/8"
13/64 or 15/64
2
1/4"
1/2"
9/32 or 19/64
3
3/8"
5/8"
25/64 or 13/32
"
--
3/4"
13/32 or 27/64
4
1/2"
--
--
10
--
7/8"
1/2
"
--
1"
17/32
5
3/4"
1-1/8"
23/32
"
--
1-1/4"
23/32 or 3/4
6
1"
1-1/2" or 1-3/4"
29/32 or 59/64
7
1-1/4"
2"
1-3/16
8
1-1/2"
2-1/4"
1-15/32
9
2"
3" or 3-1/2"
2-1/16
Always use the largest possible “REPS” Extractor. For ordinary conditions we recommend using the drill sizes as shown above. Unusual conditions, however, may require the use of a smaller or larger drill, depending upon the length of the broken part, or the depth of the hole.
California Proposition 65 Warning Warning WARNING: This product contains lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov.