Products: Tap Extractors Tap Extensions REPS Ergonomic File Handle Piloted Spindle Tapper

Pipe, Stud & Screw Extractors ("REPS")

Click here for a full description of the REPS Extractors product line.

These standard extractors are for right-hand pipe and studs. They are available for left-hand thread at no extra charge. Please specify "for left-hand thread," if required.

REPS Standard Boxed Sets

Have each size on hand by buying a standard set. Each set is furnished in a sturdy plastic case.
UPC No. 054808

Standard Boxed Sets
Set No.	EDP No.	Contents
205	50205	1 each Nos. 1, 2, 3, 4, 5
206	50206	1 each Nos. 1, 2, 3, 4, 5, 6
207	50207	1 each Nos. 1, 2, 3, 4, 10, 5, 6
210	50210	1 each of all 10 sizes

REPS Individual Sizes

Recommended sizes for pipe, stud and screw extractors.
UPC No. 054808

Individual Sizes
Extractor No.	EDP No.	For Broken Pipe	For Broken Stud or Screw
1	50001	1/8"	3/8"
2	50002	1/4"	1/2"
3	50003	3/8"	5/8" or 3/4"
4	50004	1/2"	–
10	50010	–	7/8" or 1"
5	50005	3/4"	1-1/8" or 1-1/4"
6	50006	1"	1-1/2" or 1-3/4"
7	50007	1-1/4"	2"
8	50008	1-1/2"	2-1/4" or 2-1/2"
9	50009	2"	3" or 3-1/2"

Plastic Set Cases (Empty)

For Set Nos. 205, 206, 207 – Case No. 50505
For Set No. 210 – Case No. 50510

Table of Sizes

Table of Sizes for REPS Extractors
Extractor No.	For Proken Pipe	For Broken Stud or Screw	Use Drill Size
1	1/8"	3/8"	13/64 or 15/64
2	1/4"	1/2"	9/32 or 19/64
3	3/8"	5/8"	25/64 or 13/32
"	--	3/4"	13/32 or 27/64
4	1/2"	--	--
10	--	7/8"	1/2
"	--	1"	17/32
5	3/4"	1-1/8"	23/32
"	--	1-1/4"	23/32 or 3/4
6	1"	1-1/2" or 1-3/4"	29/32 or 59/64
7	1-1/4"	2"	1-3/16
8	1-1/2"	2-1/4"	1-15/32
9	2"	3" or 3-1/2"	2-1/16

Always use the largest possible "REPS" Extractor. For ordinary conditions we recommend using the drill sizes as shown above. Unusual conditions, however, may require the use of a smaller or larger drill, depending upon the length of the broken part, or the depth of the hole.

WARNING: Wear safety goggles.